CLASS 1B (introduction class) UP TO 1000ccTime for Designs2016-02-22T11:05:54+00:00
CLASS 1B (introduction class) UP TO 1000cc
CARS READILY AVAILABLE IN THE REPUBLIC OF IRELAND (5 years or older ) AND PREPARED AS PER THIS RULEBOOK WITH THE FOLLOWING POINTS ADHERED TO.
Any 1000cc production car EXCEPT Yaris VVTI
MIN WEIGHT 670KGS
All engine parts must be original
Standard engine ECU only
Car engines and ECU will be checked on a random basis
Flywheel may NOT be Lightened
Only 12thou may be taken from head if replacing headgasket
Camshafts and gears must remain standard
Injectors must remain standard, also fuel system and fuel pressure.
Rev limiter may be disabled
Exhaust must have a silencer box fitted and be effective in reducing noise 4 branch not allowed.
The gearbox must remain standard. (K11 must use 4.0 gearbox.)
Drives and hubs must remain standard
Differential must not be locked in anyway (no limited slip diff or welded diff allowed).
TYRES only 155/70 R13 road legal tyre allowed
No Alloy wheels allowed
Wheels must not be outside of wheel arches
Standard suspension and springs only allowed. You may cut original springs only to lower car.
Hubs and wishbone must remain in original position. No movement allowed.
No camber allowed.
Bodywork To remain exactly as production, NO DESKIMMING ALLOWED
No armoring allowed to the front or back of car.
The cookie settings on this website are set to "allow cookies" to give you the best browsing experience possible. If you continue to use this website without changing your cookie settings or you click "Accept" below then you are consenting to this.